Plasma Controller with THC

|
0 Comments

[vc_row][vc_column width=”2/3″][vc_column_text]A short video showing Plasma controller with integrated capacitive type THC (Torch Height Controller). All cutting parameters such as piercing height, cutting height, delay etc are entered into the controller and M3 starts the torch touch sequence, then switches on the Plasma source and maintains torch height as material height changes to achieve a

CNC Lathe Threading (Hind Technology Controller)

|
0 Comments

[vc_row][vc_column width=”2/3″][vc_column_text]CNC threading using G32 command with HTG CNC Controller (HTG3A1S). Our controllers are dedicated systems and don’t require a PC based setup. It’s a great Mach3 alternate, Linux CNC alternate, EMC2 alternate offering a great reliability with built-in hardware for inputs and outputs for motor drives. Any type of motor such as induction, DC,

Drilling Cycles G81 G82 G83 implemented on MASSO

|
0 Comments

[vc_row][vc_column width=”2/3″][vc_column_text]MASSO CNC Controllers not have native support for G81 G82 G83 drilling cycles. Don’t know much about these GCodes – don’t worry. Watch the video and you will be able to learn about the parameters and the uses of these very useful drilling cycles.[/vc_column_text][/vc_column][vc_column width=”1/3″][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_video link=”https://www.youtube.com/watch?v=RNVMm0l8LPI”][/vc_column][vc_column width=”1/3″][/vc_column][/vc_row]

Bridgeport machine trial using Hind Technology CNC Controller

|
0 Comments

[vc_row][vc_column width=”2/3″][vc_column_text]Machining a 3D Part using Hind Technology Controller (HTG3A-1S) and an old Bridgeport-TORQ-CUT 30 machine. Controller running all machine operations including 1.3 kw YASKAWA motors and drives[/vc_column_text][/vc_column][vc_column width=”1/3″][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_video link=”https://www.youtube.com/watch?v=FzDQKd05b9A”][/vc_column][vc_column width=”1/3″][/vc_column][/vc_row]

Plasma Controller with THC

|
0 Comments

[vc_row][vc_column width=”2/3″][vc_column_text]A short video showing Plasma controller with integrated capacitive type THC (Torch Height Controller). All cutting parameters such as piercing height, cutting height, delay etc are entered into the controller and M3 starts the torch touch sequence, then switches on the Plasma source and maintains torch height as material height changes to achieve a