MASSO Controller - Documentation

  1. Home
  2. MASSO Controller – Documentation
  3. Lathe – Tool Changers
  4. Hercus PC200 – 8 Tool Turret

Download documentation in PDF

Hercus PC200 – 8 Tool Turret

Step 1:

  • Please go to “F1-Setup” screen and go to the “Tool Changer”
  • Open “Tool Changer” list and select “6: Hercus PC200 – 8 Tool Turret” as shown below

 

 

 

Step 2:

Wire the sensor inputs and assign to MASSO as below:

  1. Tool Changer – Input 1 for Tool 0 signal input (used to home the turret during machine homing)
  2. Tool Changer – Input 2 for Tool counter signal input
  3. Tool Changer – Input 3 for Locking pin signal input

 

Step 3:

Wire the control outputs and assign to MASSO as below:

  1. Tool Changer – Output 1 to rotate turret for tool change rotation
  2. Tool Changer – Output 2 to rotate turret in tool lock direction

 

 

 

 

 

Was this article helpful to you? Yes 2 No

How can we help?