MASSO Controller - Documentation

  1. Home
  2. MASSO Controller – Documentation
  3. Setup and Calibration
  4. E-Stop

Download documentation in PDF



Pin No. Description
Pin 1 E-Stop Signal – To be used with MPG E-Stop Signal
Pin 2 E-Stop Signal

WARNING: To avoid damage to equipment or hazard to personnel, the system installer should connect the E-Stop button so that pressing the button opens the circuit connected to the E-STOP STATUS terminal on the control. This should disable the axis drives and the spindle drive circuits, which should both be connected to this terminal.

Wiring example with one E-Stop button on the machine:

Estop Connections


Wiring example with E-Stop button on MPG Pendant and machine:


E-Stop optocoupler drive disable example:


Was this article helpful to you? Yes 1 No 2

How can we help?