Forum Navigation
You need to log in to create posts and topics.

Help: how to connect leadshine h2-758 easy servo drive

any help here, if they have a english manual of this leadshine h2-758 easy servo drive. i dont know how to connect this to my masso controller.

any help is highly appreciated.

 

thanks

You haven't said how many Axis you are using Pinoy.  The attached diagram is for a 3 axis setup. If you have 4 or 5 I will work-up a new diagram for you. Attached chart shows pin numbers.
Hope this helps. Cheers, Patrick
Uploaded files:
  • H2-758-Pins.jpg
  • H2-758-Leadshine_.jpg

thank you @clover i am using 3 axis. is the PPR of this model has 4000ppr.

 

thanks in advance

 

Rex

@pinoy-cnc

There was a small error on the diagram I posted, it has now been corrected. Please use the drawing above not the earlier one if you have happened to download that one.

Pinoy I cannot find an English manual, I have used Google translate to get the attached from the Chinese manual.

 

Uploaded files:
  • Chart-Parameters.jpg
Quote from clover on June 16, 2019, 3:55 am

@pinoy-cnc

There was a small error on the diagram I posted, it has now been corrected. Please use the drawing above not the earlier one if you have happened to download that one.

Pinoy I cannot find an English manual, I have used Google translate to get the attached from the Chinese manual.

 

thank you clover