23.3.Torch Touch (floating head) Signal
The torch touch (MASSO input) signal is used to find the top of the workpiece before starting a cut. Generally a switch or sensor is mounted on Z axis floating head, this input is then used internally by MASSO to automatically offset the Z axis gap from the switch / sensor. This input is used with G38.2 command.
Floating head switch / sensor gap calibration
As each machine floating head gap between the switch / sensor to the torch tip is different, you can enter the distance in the F1-Setup screen under Torch Height Control settings. By setting this value MASSO will internally offset this to automatically position the torch touch position, this also saves time and avoids confusion setting the offset values in CAM softwares.
MASSO torch touch switch wiring example
2 of 2 users found this section helpful